The load of the remote-control helicopter is a vital factor if you are likely to use a battery inside your helicopter. Many RC fanatics select a lithium polymer battery his or her optimal RC battery.
A lithium polymer battery produces treble the power you receive from the nickel battery which last longer between charges. Setting up battery power inside your helicopter generally is a relatively straightforward procedure, because the wired connections just plug together.
1. Open battery-access panel close to the front of the RC helicopter. Position your battery in to the small battery compartment, ensuring the wires in the battery are often accessible.
2. Make use of a couple of strips of obvious adhesive tape to carry battery in position. This prevents it motionless around throughout a flight ticket.
3. Place the red-colored wire in the battery in to the terminal connector in the ESC which has the red-colored wire attached. Place the black wire in the battery towards the terminal connector in the ESC which has a black wire connected. Simply push the wires in to the connector making use of your fingers. Close battery-access panel in your helicopter.
4. Locate the electronic speed controller. It is almost always centrally placed and effectively connects the motor, receiver, switch and battery together. You will find two loose wires stretching in the ESC having a dual connector around the finish another wires in the ESC are attached to the other equipment.
3300mAh 7.4v rc battery
Capacity: 3300
Voltage: 7.4
T ±5% mm: 15.0
W ±5% mm: 34.0
L ±5% mm: 115.0
Weight: 198.0
Continuous: 50C(165A)
Burst: 100C(330A)
No comments:
Post a Comment